Leica Scan Files

Leica scan files can be read by JetStream Roamer.

Supported Entities

• Points.

Unsupported Entities

• No other entities are supported.

Leica Scan File Reader Options

Setting the Leica Scan file reader options

1. Go to Tools, Global Options, Leica

   The Leica dialog is displayed

   

2. Set the value in the Sample rate edit box if you want to adjust the frequency of points extracted from the input file. By increasing the rate, the number of points extracted will be reduced. This will have the effect of reducing the image resolution, but increasing the speed with which the file is loaded.

3. From the Point colors drop-down, choose how the points are brought through when opening Leica files. None brings through the points set to white. Raw Intensities uses the intensities set in the file. Color uses the color settings in the file. Color-Mapped Intensity transforms point intensity values to a spectrum of RGB colors. The Gamma Correction Level is used to alter the gamma correction values whilst using the point intensities set in the file. Gamma values can range between 0.0 and 1.0 are useful to correct weighting of intensity values at the lower end of the intensity range.

4. Click OK to set these options or Cancel to exit the dialog without setting them.